# P365 MY First Range Trip with it; Failure to Fire **URL:** \ **Category:** What's Your Malfunction?\ **Created:** [May 18, 2025, 12:43pm UTC](https://community.usconcealedcarry.com/t/p365-my-first-range-trip-with-it-failure-to-fire/116284 "2025-05-18T12:43:09Z")\ **Posts on this page:** 18\ **Page:** 1
**Author:** ![SirUlrich](https://sea1.discourse-cdn.com/flex015/user_avatar/community.usconcealedcarry.com/sirulrich/32/31157_2.png) [@SirUlrich](https://community.usconcealedcarry.com/u/SirUlrich)\ **Post date:** [May 18, 2025, 12:43pm UTC](https://community.usconcealedcarry.com/t/p365-my-first-range-trip-with-it-failure-to-fire/116284/1 "2025-05-18T12:43:09Z")
Recently bought a second hand P365 private party. Seller said he hadn’t fired it but simply realized it didn’t like the fit in his hand. He didn’t mention why the “original owner” sold it to him. Shooting Steel at the range 🥰 (love the sound), my buddy and I had a single light strike early on. After about 50-100 rounds, had a stove pipe. Then nearing 200 rounds, had a long series of failure to fire: 1, then a very other round, then a few more - probably 8-10 in total. (Then our time was up shortly thereafter.) I’m not planning to carry it until I have at least 100-200 rounds without issue… and I’m hoping it is a break-in issue… but not sure and want to do what I can before I write a $250 check to a gun smith 😖 Thoughts and Suggestions? I ignore anyone who says “sell it and buy a Glock”; there is a full thread on the Glock’s inability to fire on command 😉 Thanks ---
**Author:** ![General\_Consensus](https://sea1.discourse-cdn.com/flex015/user_avatar/community.usconcealedcarry.com/general_consensus/32/129258_2.png) [@General\_Consensus](https://community.usconcealedcarry.com/u/General_Consensus)\ **Post date:** [May 18, 2025, 1:29pm UTC](https://community.usconcealedcarry.com/t/p365-my-first-range-trip-with-it-failure-to-fire/116284/2 "2025-05-18T13:29:17Z")
I have a 365xl that my wife uses … Have put many rounds down range with it… without incident … from cheap range ammo to the good stuff. Make sure you clean it well and lube it .. Then try it, if you still are getting failures… Try a different mag … If it still fails call sig. Ship it to them they should fix the issue for free… ---
**Author:** ![George98](https://sea1.discourse-cdn.com/flex015/user_avatar/community.usconcealedcarry.com/george98/32/28818_2.png) [@George98](https://community.usconcealedcarry.com/u/George98)\ **Post date:** [May 18, 2025, 1:38pm UTC](https://community.usconcealedcarry.com/t/p365-my-first-range-trip-with-it-failure-to-fire/116284/3 "2025-05-18T13:38:58Z")
I would suggest a very deep clean and lube. I’m sad to relay my dearly departed Father’s advice! “When you buy a used car, you bought the original owners problems”. Good luck. ---
**Author:** ![Robert1246](https://sea1.discourse-cdn.com/flex015/user_avatar/community.usconcealedcarry.com/robert1246/32/39522_2.png) [@Robert1246](https://community.usconcealedcarry.com/u/Robert1246)\ **Post date:** [May 18, 2025, 1:44pm UTC](https://community.usconcealedcarry.com/t/p365-my-first-range-trip-with-it-failure-to-fire/116284/4 "2025-05-18T13:44:42Z")
> [@SirUlrich](#): > > He didn’t mention why the “original owner” sold it to him. Maybe the original owner shot the heck out of it. Probably replaced the slide spring, but not the hammer spring. Just a guess.. sorry I was thinking it was hammer fired. Probably replaced the firing pin spring. ---
**Author:** ![General\_Consensus](https://sea1.discourse-cdn.com/flex015/user_avatar/community.usconcealedcarry.com/general_consensus/32/129258_2.png) [@General\_Consensus](https://community.usconcealedcarry.com/u/General_Consensus)\ **Post date:** [May 18, 2025, 1:51pm UTC](https://community.usconcealedcarry.com/t/p365-my-first-range-trip-with-it-failure-to-fire/116284/5 "2025-05-18T13:51:06Z")
Good point, also when buying second hand. Make sure to look for signs of wear… Check the slides and other spots for wear… If they told you, they only shot it a couple of times. It feels loose and you see wear on the slides … You just laugh at the guy and say… HEY, don’t lie to me lie to women… Get it straight … ---
**Author:** ![deactivated](https://avatars.discourse-cdn.com/v4/letter/d/50afbb/32.png) [@deactivated](https://community.usconcealedcarry.com/u/deactivated)\ **Post date:** [May 18, 2025, 3:00pm UTC](https://community.usconcealedcarry.com/t/p365-my-first-range-trip-with-it-failure-to-fire/116284/7 "2025-05-18T15:00:24Z")
I’m “digging” the warranty idea to save on costs for inspection/repair. Not unlike a car. > **[SIG SAUER Warranty | Information and Registration](https://www.sigsauer.com/warranty)** > > Access SIG SAUER warranty details to understand the extensive coverage and support following your purchase. Also, find guidance on firearm registration. Ammo: I had a pistol that was brand new from the factory, had a few jams. I used about six different brands of ammo and found one brand of ammo which resulted in reliability. I never realized until then, that some also work best with very particular ammo. ---
**Author:** ![Gregory258](https://sea1.discourse-cdn.com/flex015/user_avatar/community.usconcealedcarry.com/gregory258/32/160312_2.png) [@Gregory258](https://community.usconcealedcarry.com/u/Gregory258)\ **Post date:** [May 18, 2025, 4:01pm UTC](https://community.usconcealedcarry.com/t/p365-my-first-range-trip-with-it-failure-to-fire/116284/8 "2025-05-18T16:01:55Z")
I really want to get a 365 FUSE at some point. On the main topic… I agree with the deep clean and lube. I usually blame a stovepipe on the shooter, but you had so many issues I doubt it’s a grip issue. Light strike sounds like a firing pin spring issue. The FTFs, did you notice any indication of a light strike or did the pin fully impact the primer? With a good strike and no boom I’d look at ammo first. ---
**Author:** ![TheKid](https://sea1.discourse-cdn.com/flex015/user_avatar/community.usconcealedcarry.com/thekid/32/30679_2.png) [@TheKid](https://community.usconcealedcarry.com/u/TheKid)\ **Post date:** [May 18, 2025, 4:44pm UTC](https://community.usconcealedcarry.com/t/p365-my-first-range-trip-with-it-failure-to-fire/116284/9 "2025-05-18T16:44:45Z")
I keep a can of brake free in my range bag. If I have a new or used firearm that does that I take the ammo and mag out then I spray the heck out of it. Wipe down with a rag and fire another mag, or attempt to, downrange. If problem remains, I address the proble with the person/store that sold it to me. If problem goes away I take it home and strip it all the way down and thoroughly clean it and try another day. ---
**Author:** ![SirUlrich](https://sea1.discourse-cdn.com/flex015/user_avatar/community.usconcealedcarry.com/sirulrich/32/31157_2.png) [@SirUlrich](https://community.usconcealedcarry.com/u/SirUlrich)\ **Post date:** [May 18, 2025, 8:08pm UTC](https://community.usconcealedcarry.com/t/p365-my-first-range-trip-with-it-failure-to-fire/116284/10 "2025-05-18T20:08:59Z")
The rounds all looked virgin… it was almost like the trigger was dead and disconnected until I racked the slide ejecting the untouched round and reset the striker assembly. A buddy suggested a full stripping and deep clean / lube, and then to replace the striker assembly if the cleaning didn’t resolve the issue. I was kinda going back and forth on the SIG OEM striker at $70, the OEM “kit” at $100, and then an aftermarket Titanium striker kit at $200… … … but if there is a chance a deep clean and Sig would replace the striker assembly, wouldn’t it be advisable to just let SIG handle all the hassle? But the follow-up question with sending it off to Sig, would it need to be “transferred” back through an FFL (for $50 transfer and $10 NICS) or would Sig ship it back to my doorstep? IDK how this process would work… I can’t say the stovepipe wasn’t me… but the light strike and the unstruck rounds was beyond me. I understand light strikes and my P250 had a huge issue with light strikes until I had ALLLLL the springs replaced. I haven’t had a single issue since the springs were replaced as my Christmas 2023 gift from my wife (along with a new rear Sig night sight and front fiberoptic blade being installed at the same time). ---
**Author:** ![General\_Consensus](https://sea1.discourse-cdn.com/flex015/user_avatar/community.usconcealedcarry.com/general_consensus/32/129258_2.png) [@General\_Consensus](https://community.usconcealedcarry.com/u/General_Consensus)\ **Post date:** [May 18, 2025, 9:25pm UTC](https://community.usconcealedcarry.com/t/p365-my-first-range-trip-with-it-failure-to-fire/116284/11 "2025-05-18T21:25:16Z")
For me, I just go to a buddy of mine at the gun shop. He calls them gets a number I think. Sends it back. They fix it at no cost. They sent it back to him and I pick it up… Look into it. A lot of manufacturers do this… I know rock island does.. It may appear that these companies really stand behind their weapons… Keep in mind if it malfunction and you get injured… They could be held liable… There are a lot of dems just waiting in the jury pool … To make them pay… ---
**Author:** ![Gary\_H](https://sea1.discourse-cdn.com/flex015/user_avatar/community.usconcealedcarry.com/gary_h/32/5302_2.png) [@Gary\_H](https://community.usconcealedcarry.com/u/Gary_H)\ **Post date:** [May 18, 2025, 9:50pm UTC](https://community.usconcealedcarry.com/t/p365-my-first-range-trip-with-it-failure-to-fire/116284/12 "2025-05-18T21:50:19Z")
I shipped my Springfield directly to them for warranty work a couple years ago. They worked on it and shipped it back to my house in Florida. ---
**Author:** ![Will\_B](https://sea1.discourse-cdn.com/flex015/user_avatar/community.usconcealedcarry.com/will_b/32/102791_2.png) [@Will\_B](https://community.usconcealedcarry.com/u/Will_B)\ **Post date:** [May 19, 2025, 1:31am UTC](https://community.usconcealedcarry.com/t/p365-my-first-range-trip-with-it-failure-to-fire/116284/15 "2025-05-19T01:31:26Z")
I’ve probably put a thousand rounds total through my little 365x…. Never had any hiccups at all. If I was in your shoes, it would be on its way back to SIG already, because something certainly isn’t right with that gun! ---
**Author:** ![SirUlrich](https://sea1.discourse-cdn.com/flex015/user_avatar/community.usconcealedcarry.com/sirulrich/32/31157_2.png) [@SirUlrich](https://community.usconcealedcarry.com/u/SirUlrich)\ **Post date:** [May 20, 2025, 11:54am UTC](https://community.usconcealedcarry.com/t/p365-my-first-range-trip-with-it-failure-to-fire/116284/17 "2025-05-20T11:54:31Z")
$55 for round trip, 2nd day air with adult signature required both ends, shipping back to Sig. “Expected to be under warranty and fully covered unless negligence or normal ware & tear.” I was emailed a FedEx Shipping Label, and packed it up and sealed it up… but was directed to inform the folks at the FedEx counter that it was a firearm… At the local FedEx Print & Ship office (hoping for a 45+ yo manager who has done this a dozen times over), I waited my turn patiently and finally walked up to the counter where a younger feller (HOPEFULLY 21-23 yo!!) was training a gentleman probably 5-10 years older than him. I tried to be subtle about the contents, with now 6 other parties standing in line behind me, but the younger guy didn’t get the hint as he’s staring at my carry permit as “photo government ID is required for all shipments” and blurted out for the whole line to hear, “IT’S A FIREARM?!?!” 😣🤬🫩 “yes, and again, I’m shipping it back to the manufacturer.” He then told the trainee, this is one of the few exceptions to [something], then informed/asked me if they could inspect it, “make sure it was ‘empty’.” _I unsealed it_, and _I showed them clear_, as the young guy inspected the magazines… not about to hand my firearm over to some random feller at the corner store I don’t know!!! Half wonder it if would have been easier with the blue-hair … person … at the FedEx counter at the Walgreens… Was I in the wrong? Would y’all have done anything differently? Thanks for the counsel and advise! ---
**Author:** ![Gregory258](https://sea1.discourse-cdn.com/flex015/user_avatar/community.usconcealedcarry.com/gregory258/32/160312_2.png) [@Gregory258](https://community.usconcealedcarry.com/u/Gregory258)\ **Post date:** [May 20, 2025, 12:56pm UTC](https://community.usconcealedcarry.com/t/p365-my-first-range-trip-with-it-failure-to-fire/116284/18 "2025-05-20T12:56:39Z")
Sounds like you handled it well. ---
**Author:** ![SirUlrich](https://sea1.discourse-cdn.com/flex015/user_avatar/community.usconcealedcarry.com/sirulrich/32/31157_2.png) [@SirUlrich](https://community.usconcealedcarry.com/u/SirUlrich)\ **Post date:** [May 21, 2025, 3:45pm UTC](https://community.usconcealedcarry.com/t/p365-my-first-range-trip-with-it-failure-to-fire/116284/20 "2025-05-21T15:45:19Z")
Hrmmm, I was trying to follow the instructions of the Sig rep ---
**Author:** ![George245](https://avatars.discourse-cdn.com/v4/letter/g/c57346/32.png) [@George245](https://community.usconcealedcarry.com/u/George245)\ **Post date:** [May 21, 2025, 5:03pm UTC](https://community.usconcealedcarry.com/t/p365-my-first-range-trip-with-it-failure-to-fire/116284/22 "2025-05-21T17:03:40Z")
Check the ?butt end of your brass after some shots to see if the striker is a clean poke or is there an imprint of drag or poor strike. ---
**Author:** ![SirUlrich](https://sea1.discourse-cdn.com/flex015/user_avatar/community.usconcealedcarry.com/sirulrich/32/31157_2.png) [@SirUlrich](https://community.usconcealedcarry.com/u/SirUlrich)\ **Post date:** [May 28, 2025, 11:26am UTC](https://community.usconcealedcarry.com/t/p365-my-first-range-trip-with-it-failure-to-fire/116284/24 "2025-05-28T11:26:32Z")
Got it back from Sig yesterday… They replaced the Barrel, Recoil Spring, Striker Assembly, and the Trigger Bar Spring! All within the $55 total round trip shipping fee! They have won a customer! Now to get back to the range! ---
**Author:** ![Gregory258](https://sea1.discourse-cdn.com/flex015/user_avatar/community.usconcealedcarry.com/gregory258/32/160312_2.png) [@Gregory258](https://community.usconcealedcarry.com/u/Gregory258)\ **Post date:** [May 28, 2025, 2:44pm UTC](https://community.usconcealedcarry.com/t/p365-my-first-range-trip-with-it-failure-to-fire/116284/26 "2025-05-28T14:44:31Z")
Excellent news and seems like a nice quick turnaround